 Home |
Workshop Solutions |
| Home |
Workshop Solutions |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Originator.......Mike Cooper E-mail....bedrock@bconnex.net |
THE PROBLEM: Going snowmobiling and taking my wheelchair along so I could get into restaurants or a friends home etc.
THE SOLUTION: An easy one piece bolt on, it even acts as a backrest.
photo 6: Shows hole drilled in wheelchair frame to mount on bracket. A chain should be attached so you don't lose the pin .
photos 9 & 10: shows hinge and clamping bolts. The rack tends to rotate around the lift bar. two sided tape will stop it but a dowel pin to locate it firmly on the lift bar would be better. Also, the rubber covering should be cut off the lift bar.
photo 8: The tube bar and flat backing plate (arrows) can be cut down to get the wheelchair off and on easier ( found that out after using it a few times).
| Home |
Workshop Solutions |